Hotpoint Washing Machine Leaking From Bottom Front
Comments hotpoint washing machine leaking from bottom front

Hotpoint Washing Machine Leaking From Bottom Front

Posted on

Hotpoint Washing Machine Leaking From Bottom Front

Here is a list of parts to check if your GE & Hotpoint washer develop a water. Follow the instructions below to find where your GE or Hotpoint washing machine is leaking.. Slide your tool along the seam between the top and front panels, the clips. . There could be a leakage underneath from a lot of pressure building up.
Hoses. If your washer is leaking you should first check the hoses. There are several types of hoses found on a washing machine and the most common are the drain and fill hoses. The fill hoses connect the household supply to the water inlet valve and are normally located at the rear of the washer.
The drain hose most commonly leaks from the connection between the pump and the back of the washer. If the washer is pushed too far against the wall, the hose can rub against the wall and form a leak. Inspect the drain hose for leaks. If the drain hose is leaking, replace it.
Don't panic when you have a washing machine leaking water!. Block up the front with a car jack or 2x4s so it can't tip over while you reach underneath.